Clean up your messy entryway with a DIY shoe rack

Deutschland Nachrichten Nachrichten

Clean up your messy entryway with a DIY shoe rack
Deutschland Neuesten Nachrichten,Deutschland Schlagzeilen
  • 📰 PopSci
  • ⏱ Reading Time:
  • 70 sec. here
  • 3 min. at publisher
  • 📊 Quality Score:
  • News: 31%
  • Publisher: 63%

A messy entryway can be both an eyesore and a hazard. Clean up all those loose shoes by building your own shoe rack.

If you don’t have a dedicated workshop, choose a space large enough to move around and make your cuts. Then, using your tape measure, pencil, and square, mark the following cuts for each piece of the table:Draw a line at the halfway mark on one of your 2-by-6 pieces so you’ll cut two roughly 4-foot boards.Mark each of the 2-by-4s at 29.5 inches from one end and 29.5 inches from the other end, for a total of four cuts.

For the perfect cut, line your circular saw blade up with the pencil lines, then place your square flush with the left side of your circular saw’s shoe to guide the process.Using a piece of sandpaper, sand each piece of wood until it is smooth and use a paint brush to clean off any dust and debris.If you’re worried about splinters, wear gloves or wrap the sandpaper around a block of wood to create a buffer for your hands.Place two of the legs so their outside edges are 44.5 inches apart.

Drive four 1.5-inch screws into the wide face of the 1-by-4 to connect it to the legs: two on each side, centered on the 2-by-4 and 1 inch from the closest edge. Make sure the head of each screw goes at least ⅛ of an inch into the wood. .When you’re done assembling one set of legs, it should look like this.Stand one set of legs on its short side so it’s easier to work on this step.

Now place your 44.5-inch 2-by-6 between the legs, resting the soon-to-be-rack directly above the lines you drew. The lines should be visible just beneath the board. Finally, drill your 2-inch screws into each of the pre-drilled holes. .Temporarily place a leftover piece of 1-by-4 under the tapered end of each of the legs on the ground. This will match the 1-by-4 screwed to the top of the legs and keep everything level while you work.Stand your table up. All that’s left is to assemble the top.

Wir haben diese Nachrichten zusammengefasst, damit Sie sie schnell lesen können. Wenn Sie sich für die Nachrichten interessieren, können Sie den vollständigen Text hier lesen. Weiterlesen:

PopSci /  🏆 298. in US

Deutschland Neuesten Nachrichten, Deutschland Schlagzeilen

Similar News:Sie können auch ähnliche Nachrichten wie diese lesen, die wir aus anderen Nachrichtenquellen gesammelt haben.

How to make DIY hand sanitizerHow to make DIY hand sanitizerIf you want to get some DIY bragging rights, you can easily make your own hand sanitizer with supplies you can find at a drugstore or may already have at home.
Weiterlesen »

3 DIY bug traps that actually work3 DIY bug traps that actually workBug traps can be hit or miss, unless you follow expert instructions and make your own.
Weiterlesen »

A Deeper Look into Clean Architecture: Flutter vs Kotlin | HackerNoonA Deeper Look into Clean Architecture: Flutter vs Kotlin | HackerNoon'A Deeper Look into Clean Architecture: Flutter vs Kotlin' fluttertutorial advantagesoffluttermobile
Weiterlesen »

These High-Tech Adjustable Dumbbells Let You Switch Weights With Your VoiceThese High-Tech Adjustable Dumbbells Let You Switch Weights With Your VoiceNordictrack’s New Alexa-enabled Dumbbells Let You Switch Weights With Your Voice
Weiterlesen »

Google is now requiring office workers to get weekly molecular COVID-19 testsGoogle is now requiring office workers to get weekly molecular COVID-19 testsMeta has also upped its health policies for employees.
Weiterlesen »

L'Occitane's Best-Selling Serum Is a Nighttime Ritual in a BottleL'Occitane's Best-Selling Serum Is a Nighttime Ritual in a BottleThe nighttime step we didn't know we were missing. 🌙
Weiterlesen »



Render Time: 2025-03-04 14:21:21